 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Surface Mount SOIC Resistor Networks SOIC Series * Tested for COTS applications * Both narrow and wide body versions available * Standard JEDEC 8, 14, 16, and 20 pin packages * Ultra-stable TaNSil(R) resistors on silicon substrates * Standard Sn/Pb and Pb-free terminations available Welwyn Components IRC's TaNSil(R) SOIC resistor networks are the perfect solution for high volume applications that demand a small wiring board footprint. The .050" lead spacing provides higher lead density, increased component count, lower resistor cost, and high reliability. The tantalum nitride film system on silicon provides precision tolerance, exceptional TCR tracking, low cost and miniature package. Excellent performance in harsh, humid environments is a trademark of IRC's self-passivating TaNSil(R) resistor film. The SOIC series is ideally suited for the latest surface mount assembly techniques and each lead can be 100% visually inspected. The compliant gull wing leads relieve thermal expansion and contraction stresses created by soldering and temperature excursions. For applications requiring high performance resistor networks in a low cost, surface mount package, specify IRC SOIC resistor networks. Electrical Data Resistance Range Absolute Tolerance Ratio Tolerance to R1 Absolute TCR Tracking TCR Element Power Rating @ 70C Isolated Schematic Bussed Schematic Power Rating @ 70C SOIC-N Package Power Rating @ 70C SOIC-W Package Rated Operating Voltage ________________ (not to exceed Power X Resistance) Operating Temperature Noise General Note Environmental Data 10 - 250KW To 0.1% To 0.05% To 25ppm/C To 5ppm/C 100mW 50mW 8-Pin 14-Pin 16-Pin 16-Pin 20-Pin 400mW 700mW 800mW 1.2W 1.5W Test Per MIL-PRF-83401 Thermal Shock Power Conditioning High Temperature Exposure Short-time Overload Low Temperature Storage Life Typical Delta R 0.02% 0.03% 0.03% 0.02% 0.03% 0.05% Max Delta R 0.1% 0.1% 0.05% 0.05% 0.05% 0.1% 100 Volts -55C to 125C <-30dB Welwyn Components reserves the right to make changes in product specification without notice or liability. All information is subject to Welwyn's own data and is considered accurate at time of going to print. (c) Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 * Facsimile: +44 (0) 1670 829465 * Email: info@welwyn-tt.com * Website: www.welwyn-tt.com A subsidiary of TT electronics plc SOIC Series Issue June 2006 Surface Mount SOIC Resistor Networks Manufacturing Capability Data Welwyn Components (c) Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 * Facsimile: +44 (0) 1670 829465 * Email: info@welwyn-tt.com * Website: www.welwyn-tt.com SOIC Series Issue June 2006 Surface Mount SOIC Resistor Networks Physical and Schematic Data (mm) N Welwyn Components N N R1 R1 1 2 3 1 2 3 B N Schematic A Isolated E R1 R1 Schematic B Bussed N N N Note: N = number of pins (8, 14, 16) R1 R1 1 2 3 1 2 3 1.27 Typ L Schematic A Isolated 1 2 3 1 2 3 1 2 3 Schematic A Isolated Note: N = number of pins (8, 14, 16) Schematic B Bussed Note: N = number of pins (8, 14, 16) SOIC-N Schematic B Bussed H SOIC-W 16-Pin 16-Pin 20-Pin 0.41 0.08 0.18 0.08 L E 8-Pin 14-Pin 4.9 0.1 8.66 0.1 6.0 0.2 3.9 0.1 1.5 0.2 9.91 0.1 10.21 0.1 12.75 0.1 10.3 0.3 7.5 0.1 2.5 0.15 Note: All dimesions exclude mold flash and end flash which shall not exceed 0.15 per side. B H Power Derating Data 100 Ordering Data SS8 Style A 01 10K - F B SS4 = 8-pin SOIC-N SS7 = 14-pin SOIC-N SS8 = 16-pin SOIC-N SL8 = 16-pin SOIC-W SL0 = 20-pin SOIC-W % Of Rated Power Schematic 50 A = Isolated network B = Bussed network Absolute TCR Code 00 = 250ppm/C; 01 = 100ppm/C 02 = 50ppm/C; 03 = 25ppm/C 10 25 70 125 Resistance Code 4-Digit Resistance Code Ex: 1002 = 10KW, 50R1 = 50.1W Temperature in C For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. Absolute Tolerance Code J = 5%; G = 2%; F = 1%; D = 0.5% C = 0.25%; B = 0.1% Optional Ratio Tolerance Code G = 2%; F = 1%; D = 0.5%; C = 0.25%; B = 0.1%; A = 0.05% Packaging Specify tubes or tape & reel. Finish Blank = Pb - free PB = SnPb (c) Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 * Facsimile: +44 (0) 1670 829465 * Email: info@welwyn-tt.com * Website: www.welwyn-tt.com SOIC Series Issue June 2006 |
Price & Availability of SS8A-00-10K-BC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |